- or
No existing idea results
- ~ No ideas found ~
4716 results found
-
Auto-assign tickets with initial reply
Auto-assign tickets. When a tech replies to a ticket, they should be assigned the ticket by default. We shouldn't need to manually assign tickets or use round robin ticket set up.
64 votes -
Limit ticket loop notification
Ticketing: we have a client that puts us within a thread with their vendor, and then it creates a loop of tickets being created back and forth. If there were some way of stopping that. Limit amount of tickets in a certain period of time. Time based minute, if tickets get created at the same time then maybe that would be stopped. Too many tickets within a short period of time then it would stop sending out the response.
2 votes -
Creation of tag - standardized for all techs
Tags – now allow us to do custom tags. They are hard coded for a drop down. If we want to put some sort of status, one user may spell it one way and another tech another way, it kind of doesn’t maintain integrity from user to user. If you make a custom one, then make it to the list. So some standardization on the way it is written. Would really want. Would want to have it as a drop down. Would be very helpful
2 votes -
A smarter way to monitor temperature
One of the most important features of any RMM solution is the monitoring of hardware. Specifically, temperature of the motherboard, CPU and DISK. Atera has that capability right now and thresholds are fully customizable. But different hardware has different thresholds.
Within the Intel lineup, there are different thresholds for the i3, i5 and i7. And even within the same processor family, there are different thresholds for different generations.
Having one conservative threshold generates a lot of false alerts. And going the other way is risky. Creating different thresholds for different processor types and generations becomes a management nightmare giving that we can't create monitoring sets yet.
What would be great is if Atera built an AI engine that received temperature telemetry data from the agents and compared them against a database of specifications for each peace of hardware. This way, you only have to build it once and every client benefits from it.
One of the most important features of any RMM solution is the monitoring of hardware. Specifically, temperature of the motherboard, CPU and DISK. Atera has that capability right now and thresholds are fully customizable. But different hardware has different thresholds.
Within the Intel lineup, there are different thresholds for the i3, i5 and i7. And even within the same processor family, there are different thresholds for different generations.
Having one conservative threshold generates a lot of false alerts. And going the other way is risky. Creating different thresholds for different processor types and generations becomes a management nightmare giving that…
64 votes -
webp
With the conversion of web images to the Webp format. can the upload of customer logos be updated to allow webp images?
1 vote -
Include the option of specifying additional email address' for each customer.
Some users have and send support requests from multiple emails or aliases. This results in tickets not getting assigned to the correct contact. Syncro, Automate, and other PSA already have the ability to specify additional email addresses per contact.
3 votes -
Have tab for routine daily or weekly tasks that doesn't impact statistics
Need to record time when cleaning AD or App users or devices. And other tasks that don't have a user request but need to be done regularly.
1 vote -
add customer right for none admin
I have technicians on the field and they need to add new customers for agent deployement. A none admin should be able to add new customers.
1 vote -
2FA
Need the ability to disable 2FA or make it a phone call for devices that multiple need access to.
7 votes -
Folder Automation
Create an option to assign devices to folders automatically based on device name, for example, if a device name starts with "example-" then place in folder "example".
This is an extremely powerful way of deploying apps automatically with intune and would be highly beneficial for deploying software packages and windows patches unattended. It would also prevent new devices from being missed and left unpatched.
13 votes -
Ability to change invoice number to match external systems.
We would like the ability to be able to change invoice numbers to match them up with our external billing system.
16 votes -
Map and GEO-Location integration with Remote Wipe.
It would be nice for the agent to show it's location if in case of a stolen device connects to the internet. Have the ability to schedule a remote wipe or scripted data removal if it checks in or even sound an alarm if a device is stolen nearby.
16 votes -
Please improve Block Hours
Most of the ideas posted related to Block Hours are GREAT ideas. Our company sells a LOT of block hours. As it stands Atera does not do a good job with this type of contract. When hours run out, you need to give us ability to PREVENT techs from using that contract which otherwise runs up the bill that will be a surprise for everyone. Also, some clients buy huge blocks of hours on-demand. When they run out or need budget money to spend, they buy more. You need a simple report/invoice that shows Beginning Balance, additions, subtractions, Ending Balance. Very simple. Please make this change and most of the block hour changes. Thank you.
Most of the ideas posted related to Block Hours are GREAT ideas. Our company sells a LOT of block hours. As it stands Atera does not do a good job with this type of contract. When hours run out, you need to give us ability to PREVENT techs from using that contract which otherwise runs up the bill that will be a surprise for everyone. Also, some clients buy huge blocks of hours on-demand. When they run out or need budget money to spend, they buy more. You need a simple report/invoice that shows Beginning Balance, additions, subtractions, Ending Balance.…
4 votes -
Way not to e-mail contact when replying to ticket
We need a way to send a ticket to different people without bothering our customer every single time we send or receive something back and forth with a third party.
This might include sendint a request for parts to a third party that doesn't involve the customer at all or things similar to this.
Right now there is no way to do this with Atera. It forces us to address the contact as the main recipient of every e-mail involved in the ticket and there is no way to even forward the ticket to anybody else. This would go a long way to making the ticketing system more useful to us. Right now it's useless and there is no point in us getting our customers on board with Atera as well.
We need a way to send a ticket to different people without bothering our customer every single time we send or receive something back and forth with a third party.
This might include sendint a request for parts to a third party that doesn't involve the customer at all or things similar to this.
Right now there is no way to do this with Atera. It forces us to address the contact as the main recipient of every e-mail involved in the ticket and there is no way to even forward the ticket to anybody else. This would go a…
10 votes -
Allow AND and OR conditions
Allow conditions like AND and OR in conditions field in ticket automation. For example, the ability to be able to send email to technician only if the ticket is signed by someone else. If the ticket is assigned by technician himself, the email should not be sent to him.
24 votes -
Clean up Mac Agent installer script
The current Mac agent installer script downloads the installer into the CWD and runs the installer from there. After installing, it does not delete the Atera installer. I request the installer script be modified to download the installer into the /tmp directory on the Mac, run the installer from there (by adding the flag "-pkg /tmp/AgentInstaller.pkg" to the installer command), and add a "rm '/tmp/AgentInstaller.pkg'" to the end of the script.
3 votes -
Export contract for end customer
An export option that allows a printable version of the Atera contract to be reviewed and signed by the end customer
3 votes -
work from home access to servers OS
I have restaurants as customes and they use servers to run POS enviroment. they need access to it to run reports, clock employees in and out, maintenance etc.. just like a workstation. WFH should work on server OS. please update it so it does. thank you
6 votes -
products
Add Products Module to the Internal IT Department Model
Currently as an "Internal IT Department" we will never bill our other individual company departments. With that said, it would be nice to track inventory of either products we have in stock and/or what we are ordering for other groups and tie dollar amounts to those. This will help IT departments in general as it gives us insight into keeping stock via trends, record other departments IT spending as-well-as keep consistent on ordering special requests.
1 vote -
TeamViewer installation as splashtop
We use TeamViewer as a support tool.
It would be nice to have the same operation as the Splashtop module.
What do you mean?
If the client machine does not have the software to install then it installs it silently.1 vote
- Don't see your idea?