- or
No existing idea results
- ~ No ideas found ~
4769 results found
-
When running scripts, to stay in that drop down so you can run other scripts.
When running scripts, to stay in that drop down so you can run other scripts. Currently you need to go into manage, run scripts and search again for the nex script you want to run.
3 votes -
Make client inactive
We should be able to have option to make a client inactive or delete it. Sometimes we need that.
2 votes -
Customizable Step by Step Task Automation
I would like the ability to create a step by step automation to control the order of which tasks/scripts get installed and insert reboot/shutdown tasks as needed. The automation would complete when all tasks have been completed in order. Having the ability to stop or continue on a task failure would be helpful as well. This would be similar to the automation of a Task Sequence in SCCM.
11 votes -
SNMP Description on Alert Email
When we set up a monitored OID and expect to receive an alert when the alert is triggered, it is crucial that description of that alert we set up is included somewhere in that email.
Without it, when we receive the alert email, we have to then go back into Atera and into the device to figure out which alert was actually triggered. Small change I feel but would have a huge impact.
3 votes -
Pasword Management Solution
I would like to see you recommend a Password Management solution in your app center that can manage client login passwords and integrate with their onsite AD, etc.
27 votes -
Notifications via pushover
Notifications via pushover NEEDS to be an option. The Atera phone app is not reliable and doesn;t keep going off when there is a notification. Plus it keeps needing to be logged into for the ability to see the alerts but most of the time they still don't show up after logging back into the app.
Give the ability to send notifications to Pushover so Atera RMM would detect that a node is offline that we want monitored and push the notification as a urgent notification to Pushover. The Pushover app then will keep alerting on your device until you acknowledge it. This is great for if you have DND turned on and you want it to go off once DND turns off. And you can of course configure your phone to let it through DND if you desire it to do so.
Notifications via pushover NEEDS to be an option. The Atera phone app is not reliable and doesn;t keep going off when there is a notification. Plus it keeps needing to be logged into for the ability to see the alerts but most of the time they still don't show up after logging back into the app.
Give the ability to send notifications to Pushover so Atera RMM would detect that a node is offline that we want monitored and push the notification as a urgent notification to Pushover. The Pushover app then will keep alerting on your device until you…
1 vote -
Helpdesk gamification
Gamify the IT Helpdesk (tickets) to make it more fun for technicians. Earn badges, compete against fellow techs or support teams for the glory!
2 votes -
Tabs to be opened for when you click on a ticket, device, alert or customer
Tabs for devices, tickets, alerts, customer. When we have multiple browser tabs opened, it really slows down the platform
2 votes -
3rd party patch management automation dynamic grouping
We came to Atera from using PDQ Inventory/PDQ Deploy and were admittedly spoiled rotten with how well that solution worked. This is in the scope of what PDQ refers to as "dynamic collections" - and this is something Atera would benefit hugely from, should they choose to go after this. I tried to keep this brief, and failed miserably - my apologies in advance, and gratitude to anyone that reads to the end ;)
For full context this video does a good job outlining dynamic collections in PDQ: https://www.youtube.com/watch?v=wVWzNhZHPV4
Here's the scenario:
We have ~50 3rd party software titles that we manage on subsets of computers. In PDQ, to manage 3rd party software we simply created a dynamic collection containing "devices with software 'xyz' installed", which we could then target for automated 3rd party software updates and patches.Take for example our deployment of Visual Studio Code and AutoCAD Inventor. There's maybe 30 users in our company that require VS Code on their computers, and about 40 that require AutoCAD inventor. These are not mutually exclusive lists; there are some users who require both VS Code and AutoCAD Inventor on their computer, and many others that need only one or the other.
We have "overlaps" like this all across our 3rd party software deployments.
I've worked with Atera Support on this and they offered the solution of using folders for 3rd party patch automation - but unfortunately, as an agent can only be a member of one folder at a time, this doesn't help our "overlaps" discussed above.
For the time being we’ve been able to achieve a “good enough/close enough” solution with Atera using the following:
1.) Create 3rd party software bundle and automation profile
2.) Use custom views in the Devices tab to create our “dynamic collections”
3.) Assign Step 1 automation profile to the devices in this viewIt’s Step 3 that gives us the trouble, as the automation profile is assigned to devices in the view, rather than the view itself. When we perform Step 3, it only applies to the devices that were in that view at that specific date/time the automation profile was assigned.
This means that, if we were to repurpose a device and it no longer needed the 3rd party automation profile from step 3, it would still have this automation profile assigned until we remove it manually. Likewise, new devices coming in do not pick up the automation profile either – even though they are dynamically added to the saved view. I think if we had the ability to assign an automated profile to a saved view, rather than the devices in the view at that point in time, that would make Atera even more powerful and beneficial to us.
Thanks for considering!
We came to Atera from using PDQ Inventory/PDQ Deploy and were admittedly spoiled rotten with how well that solution worked. This is in the scope of what PDQ refers to as "dynamic collections" - and this is something Atera would benefit hugely from, should they choose to go after this. I tried to keep this brief, and failed miserably - my apologies in advance, and gratitude to anyone that reads to the end ;)
For full context this video does a good job outlining dynamic collections in PDQ: https://www.youtube.com/watch?v=wVWzNhZHPV4
Here's the scenario:
We have ~50 3rd party software titles that…4 votes -
External Monitoring
Have the ability to monitor firewalls externally via a cloud poller rather than a device inside the network - e.g. check a firewall over the internet for http / ping rather than relying on the host inside the network being on.
1 vote -
Ability to select the URL to the device from the password tab using the APP
Ability to select the URL to the device from the password tab using the APP would be useful. It would save having to get the laptop out, especially if you are on the road alot and not near a laptop. Possibly an auto login once the url is selected.
1 vote -
Filesystem Microsoft ReFS Monitoring
Microsoft ReFS Monitoring would be helpfull
3 votes -
CyberDrain Improved Partner Portal
Integrate with CyberDrain improved partner portal for 365 management, monitoring and billing
7 votes -
Search ticket features enhancement: keyword, users, date
Search feature:
just try to find tickets, it searches ticket title. All of our tickets are raised by email mostly and different subject matter in the email. When you do search, the way of timeline of things, is not all that helpful.
o Search by keywords
o Search by users
o Search by date or at least see the actual date.7 votes -
1 vote
-
Software doesn't exist
In Ninja, we could install software based on whether it existed or not. This allowed me to automatically install the software if it was uninstalled for any reason or was missing from deployment. Even was able to generate an alert to the techs
1 vote -
Ticket Status Colours
I would really love other colors when you add a new Ticket Status.
As of right now, it's only possible to select Open, Pending, Resolved and Closed. Which grants either blue, orange, green, red or gray colors. Would love to have something like purple to make it stand out and look similar to other categories.2 votes -
Contact Documentation in Ticket
Within a ticket we need a place to document contact on that ticket
IE:
1/1/24 left voicemail to schedule meeting time
1/2/24 Restarted X and reset connection and client is still having an issue.
1/2/24 Transferred ticket to x for further support.An internal notes section that doesn't blend with the client communication on the right hand side so that a tech can document the troubleshooting done, and escalate it up and the person taking over the ticket can easily find the summary of what was done initially could be an easier fix. Or just adding a "notes" section on the ticket that only has internal notes that is right up at the top of the ticket would work well.
Within a ticket we need a place to document contact on that ticket
IE:
1/1/24 left voicemail to schedule meeting time
1/2/24 Restarted X and reset connection and client is still having an issue.
1/2/24 Transferred ticket to x for further support.An internal notes section that doesn't blend with the client communication on the right hand side so that a tech can document the troubleshooting done, and escalate it up and the person taking over the ticket can easily find the summary of what was done initially could be an easier fix. Or just adding a "notes" section on…
1 vote -
reports
Dans les rapports classiques, nous souhaiterions pouvoir sélectionner plusieurs clients, car nous avons des clients avec plusieurs site qui souhaite des rapports consolidés. comme par exemple dans le rapport: Rapport sur le contrat de niveau de service (SLA), ou un seul client peut être sélectionné.
1 vote -
intel amt
Allow for device management via Intel AMT to allow remote control of device pre-boot.
9 votes
- Don't see your idea?