38 results found
-
MS Office Updates
MS Office patches not listed as an available update.
Please enable the ability to show available/installed Office patches.536 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Use Local Time Zone for Automation Profiles
The ability to schedule automation profiles to run based on a device's local time rather than using the General Time Zone setting. For example, an OS patching automation profile that runs at 11am will run at 11am across every country/location regardless of timezone difference. Currently, the limitation is that if the profile is run at 11am and your selected timezone in Atera is set to '(UTC) - Dublin, Edinburgh, Lisbon, London', then this creates a problem where the profile runs in the middle of the night for users in Australia, which then means they won't get patched at the right…
40 votesHello, Thanks so much for submitting your idea! It’s currently under review by our product team, and should a decision be reached to develop it, we’ll keep you in the loop!
-
Windows updates installed with Atera are not synced with local client PC update history
According to Atera support, Windows Updates installed with Atera are not synced with the local Client PC update history - so no possibility for the client to check the patch level on the device. In my opinion this is a bug, not a feature.
32 votesHello, Thanks so much for submitting your idea! It’s currently under review by our product team, and should a decision be reached to develop it, we’ll keep you in the loop!
-
profile
When searching for outdated software from Reports > Software Inventory, please enable the following improvements:
allow use of a NOT (!=) crietria in the version.
allow assigning a Profile to selected results
2 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Optimized Automation and Patch
Need to find a better solution for patch and automation.
The fact that you can't run Updates, System Restore Point, and a Restart all on one profile without it running into conflicts makes little sense to me.I have now made 9 total profiles (3 sets of 3 [we have 3 different types of patch profiles running at different intervals]) to fix this. For each type we have to run System restore point, then 1 hour later a separate schedule for patches, then 2 hours after that a different, separate profile for restart. Hopefully it works.
While it isn’t really…
29 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Ability to set Active Hours in Patch Deployment.
Ability to set active hours on Windows 10 machines and Windows servers from the Patch Management templates.
17 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Run Automation Profiles on-demand on specific agents (like scripts)
It would be great to have the option to run an automation profile on a specific agent computer on demand, the way we can scripts. I know we can setup automation profiles, assign customers or agents, then run them on everything they are assigned to. That works fine most of the time. Having the option to not just run scripts on demand for specific agents, but also automation profiles the same way would save us a lot of support time. Possibly even running an automation profile on an alert, the way we can assign scripts now.
8 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Wake on Lan automation
We enabled WOL (Wake on LAN) on our desktops. It would be great if we can schedule a WOL packet being send to offline computers before processing the automation task. So we never interupt the end users by processing the updates outside office hours.
106 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
it would be useful to limit technicians to see only some threshold profiles and only some scripts. The scripts could be organized by folders
I would be useful to limit technicians to see only some threshold profiles and only some scripts.
The scripts could be organized by folders.9 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Onboarding Section
Add section to IT Automation profiles to have scripts that will only be ran once when onboarding / first agent check-in.
8 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Make 'run on offline agents' timeframe customizable for individual profiles
It would be great if the 'Run on offline agents' timeframe setting for IT Automation and Patch Management could be defined for each profile. Currently it can only be defined for all profiles.
For example, it would be great for patching or software updates to be run on offline agents for a week or more. That way they would still get the patches/updates if they were offline at the scheduled push time. However, if I have a separate profile pushing a reboot, I would never want that profile to be pushed to an offline agent when it comes back online.…
18 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Vulnerability Scanning
Either build in integration to one of the well known patch and vulnerability solutions such as Tenable.io, Perch, Topia etc. or develop your own vulnerability scanner.
16 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
patch management on the fly profile assignment and execution
It would be good if we can at the device dashboard, select one or multiple devices and execute (RUN Now) a non-applied & unscheduled patch profile
In other words, to assign a patch profile from the list of non-applied & unscheduled patch profile to run immediately and after that remove that patch from the device.
31 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Multiple Script Execution Behavior in IT Automation Profile
Allow multiple scripts in one Automation Profile that are run individually and in order. Current behvior will run all scripts concurrently.
17 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
IT Automation on new agents
"Run the profile on newly installed agents" need a automation profile for the customer and it would affect all new agents. Why not "Run the profile on new assigned agents" when the agent will get the profile assigned manually, by folder or by customer. So we have a much better flexibility.
8 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Support Automation Manager Scripts (Solarwind)
Is it possible to use the scripts created with Automation Manager in ATERA or to use such a script tool?
https://rm-downloads.logicnow.com/automation-manager/AutomationManager-2.20.0.17.exe
3 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
SSL Cert. Monitoring
It would be amazing to monitor the validity of SSL Certs.
37 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Way to update Software inventory manually
Right now if we want to automate software installation or patching, we usually write a script to silently install software and have it run on relevant devices.
The issue is that the Atera Software Inventory only updates every 24 hours. It is therefore not possible to ensure that the installation script ran correctly. If the computer then shuts down and is offline for weeks, there is no way for us to ensure that the software installation was actually successful. We need an offline software inventory that can be manually updated. In the worst case the solution should at least be…
30 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Advanced options in IT automation profiles (scan and reboot window)
Support told me that new updates on servers will be searched at the start of the IT automation profile which leads to
- higher bandwidth usage
- more time for applying patches
- reboot time which may is outside of customer's windowWhat we need:
Scan window: set time window for scanning (e.g. on day of patching in the morning/afternoon)
Patch window: set time window for the execution of the patches
Reboot window: window for rebooting (last reboot no later than X:YY)37 votesNice! The feature you requested is being reviewed by our product team. We’ll keep an eye on the number of votes, and let you know if a decision is reached to implement. Thank you for being a partner in our process!
-
Rotational Patching.
I need to rotate the patching so not all devices are updated at the same time within on organisation. I wish to spread this out over the course of a month. I need the ability to see which devices are on which patching schedule? Can you help?
10 votesNice! The feature you requested is being
reviewed by our product team. We’ll keep an
eye on the number of votes, and let you know if
a decision is reached to implement. Thank you
for being a partner in our process!
- Don't see your idea?